Quick-Ohm , Component,Heat management, high tech ceramic Sitemap Data Privacy Policy Imprint German


back      contact

High Pressure Cleaning Nozzle

High Pressure Cleaning Nozzle   Type 68 (Al 2 O 3 ) - 2500 bar

High Pressure Cleaning Nozzle
Synthetic sapphire features excellent characteristics. Because of those characteristics this nozzles offer a longer life time and cause less changeover time:

High pressure cleaning nozzles / surface finishing

By using special high pressure pump the water will be high compressed. So a water pressure can become up to 2500 bar. Just to add the nessessary kinetic energy into the high pressure water, it has to be pressed through a superfine nozzle.
The target intensity and effect of the water jet can be determined by the pressure and the nozzle selction.
Water cut technology is very suitable to fast, exact and environmentally machining of urfaces and removal of layers.
Even sensitive urfaces can be prepared smooth by this technique.
The surfaces can be cleaned efficient and residue-free and therefore they are excellent prepared to further processes.
There are many applications in the field of surface jetting: Cleaning of buildings and frontages, ships, container, streets, landing runways, tubes, drains, gullies and flash removal, remove of concrete and bitumen up to eliminate hard and soft materials and layers. Because of the water jet’s high power impact, there is no need to use chemical products. So it can be guaranteed an environmentally process. In case of extreme requirements, the compatibility of environment can be increased by intermixture of abrasive media.

ordering code
Diameter T
Diameter T

ordering code
Diameter T
Diameter T

RDT-68040* 0.40 0.016 RDT-68230* 2.30 0.091
RDT-68050* 0.50 0.020 RDT-68240* 2.40 0.094
RDT-68060* 0.60 0.024 RDT-68250* 2.50 0.098
RDT-68070* 0.70 0.028 RDT-68260* 2.60 0.102
RDT-68080* 0.80 0.031 RDT-68270* 2.70 0.106
RDT-68090* 0.90 0.035 RDT-68280* 2.80 0.110
RDT-68100* 1.00 0.039 RDT-68290* 2.90 0.114
RDT-68110* 1.10 0.043 RDT-68300* 3.00 0.118
RDT-68120* 1.20 0.047 RDT-68310* 3.10 0.122
RDT-68130* 1.30 0.051 RDT-68320* 3.20 0.126
RDT-68140* 1.40 0.055 RDT-68330* 3.30 0.130
RDT-68150* 1.50 0.059 RDT-68340* 3.40 0.134
RDT-68160* 1.60 0.063 RDT-68350* 3.50 0.138
RDT-68170* 1.70 0.067 RDT-68360* 3.60 0.142
RDT-68180* 1.80 0.071 RDT-68370* 3.70 0.146
RDT-68190* 1.90 0.075 RDT-68380* 3.80 0.150
RDT-68200* 2.00 0.079 RDT-68390* 3.90 0.154
RDT-68210* 2.10 0.083 RDT-68400* 4.00 0.157
RDT-68220* 2.20 0.087      
* auf Anfrage / sur demande / on request
TThe nozzle is made of stainless steel and a ceramic insert. Upon request, it is also available with other hole diameters.

Die Düse wird aus rostfreiem Stahl und einem Keramikeinsatz hergestellt. Auf Anfrage kann sie auch mit anderen Lochdurchmessern, geliefert werden.

La buse est fabriquée à partir d'acier inox et un insert en céramique. Sur demande elle peut aussi être livrée avec d'autres diamètres de trou.